ابدأ بالتواصل مع الأشخاص وتبادل معارفك المهنية

أنشئ حسابًا أو سجّل الدخول للانضمام إلى مجتمعك المهني.

متابعة

Which Material is very difficult to Spot welded?

user-image
تم إضافة السؤال من قبل Meharajuddin Khaja , Design Engineer , Bharath Electronics Limited (BEL), Bangalore
تاريخ النشر: 2013/10/26

All about robot spot welding and the equipment needed for robotized welding. ... This is a type of resistance welding where the spot welds are made at regular ... The process is used for joining sheet materials and uses shaped copper alloy ... it has a low resistance and high thermal conductivity compared to most metals.

 

NITHISH GEORGE NINAN
من قبل NITHISH GEORGE NINAN , CONTRACT EMPLOYEE , HCL TECHNOLOGIES

Nowadays, spot welding is the process which is used to mate two or more sheetmetals in metro trains. The process is automated using the pnematic power. All the sheetmetals coming in the range of0.5 to3mm are subjected to spot welding.

I think the main concern for spot welding is the thickness and not the material. The material should be coming under the group of metals to act as a good conductor.

mohamed sabeen
من قبل mohamed sabeen , QHSE Manager , Novus catering service

Low carbon steel is one of the most readily spot welded materials, as well as being the most commonly used material for stampings and fabrications. It can be spot welded to many ferrous and non-ferrous alloys with varying success, depending on the combination of metals joined.

Higher carbon and low-alloy steels can also be spot welded, although with reservations, because of a tendency to form harder welds, which may degrade weld performance. As carbon content increases, so does brittleness, with an associated propensity for cracking and weld separation.

Muhammad Awais Hanif
من قبل Muhammad Awais Hanif , Production Supervisor , Metro Motor Bikes (pvt.)ltd.

Tungston

prudencio paulo
من قبل prudencio paulo , salesman driver , viscaya merchandize

WG

a welding gap

 

المزيد من الأسئلة المماثلة

هل تحتاج لمساعدة في كتابة سيرة ذاتية تحتوي على الكلمات الدلالية التي يبحث عنها أصحاب العمل؟