أنشئ حسابًا أو سجّل الدخول للانضمام إلى مجتمعك المهني.
In radio communication systems, equivalent isotropically radiated power (EIRP) or, alternatively, effective isotropically radiated power[1] is the amount of power that a theoretical isotropic antenna (which evenly distributes power in all directions) would emit to produce the peak power density observed in the direction of maximum antenna gain. EIRP can take into account the losses in transmission line and connectors and includes the gain of the antenna. The EIRP is often stated in terms of decibels over a reference power emitted by an isotropic radiator with an equivalent signal strength. The EIRP allows comparisons between different emitters regardless of type, size or form. From the EIRP, and with knowledge of a real antenna's gain, it is possible to calculate real power and field strength values.
where 
and 
(output power of transmitter) are in dBm, cable losses (
) is in dB, and antenna gain (
) is expressed in dBi, relative to a (theoretical) isotropic reference antenna.
This example uses dBm, although it is also common to see dBW.
Decibels are a convenient way to express the ratio between two quantities. dBm uses a reference of1 mW and dBW uses a reference of1 W.
and
A transmission output of W is the same as dBW or dBm.
The EIRP is used to estimate the service area of the transmitter, and to coordinate transmitters on the same frequency so that their coverage areas do not overlap.
In built-up areas, regulations may restrict the EIRP of a transmitter to prevent exposure of personnel to high powerelectromagnetic fields, however EIRP is normally restricted to minimise interference to services on similar frequencies.
The Arecibo Planetary Radar transmits up to1 MW ( dBW) of power with an antenna gain of about.3 dB at.6 cm wavelength, resulting in an EIRP of roughly dBW ( TW).
هل تحتاج لمساعدة في كتابة سيرة ذاتية تحتوي على الكلمات الدلالية التي يبحث عنها أصحاب العمل؟